Books › Robotics Software Engineer roadmap

Best books for Robotics Software Engineers

This list starts with the mathematics of robot motion, then moves to the software stack and the state estimation and planning that turn sensor data into movement. The lead book is about planning theory, which is where the most difficult design decisions sit.

8 books in 3 stages, about 4,770 pages (119 hours of reading). The notes are ours, with no ratings or sales claims.

See the full Robotics Software Engineer roadmap →Best courses for Robotics Software Engineers →

How to choose your books

A short method, so you read the right book for where you are instead of the longest list.

Find your stage

  • Getting started · 2 books

    Robot motion and the software stack: the mathematics of rigid bodies and the middleware that ties a system together.

    Jump to this stage ↓
  • Doing the job · 5 books

    Perception, estimation, planning and control: the books that turn sensor data into a decision and a trajectory.

    Jump to this stage ↓
  • Senior and leading · 1 books

    Planning theory and the trade-offs between approaches, for the engineers who choose a planner for a whole platform.

    Jump to this stage ↓

If you are unsure, start one stage lower than you think. Books in a later stage assume the working knowledge the earlier ones give you.

Begin with one book

Our starting pick

Modern Robotics

by Kevin M. Lynch, Frank C. Park · 2017

It covers the configuration space and rigid-body mathematics that every robot depends on. Read it first, because the rest of the list assumes it.

See the book ↓

Then pick by your situation

Choose the next book by the problem in front of you, not by its place in the list.

Set a time budget

StageBooksPagesReadingAt 3 hrs a week
Getting started297024 hrs8 wks
Doing the job53,16079 hrs26 wks
Senior and leading164016 hrs5 wks
All 3 stages84,770119 hrs40 wks

Treat this as a ceiling, not a target. Read one book at a time, apply it, then move on; read reference-style books in sections.

Judge any book before you buy it

  • Age

    This list runs from 1994 (A Mathematical Introduction to Robotic Manipulation) to 2017 (Modern Robotics). Older books earn their place by teaching principles that do not change. For tools and platforms, buy the latest edition.

  • Level

    Check the stage before the title. A book from a later stage will make sense only once you have faced the problems it solves.

  • Format

    The longest book here, Planning Algorithms, runs about 840 pages. Read very long books as references: pick the chapter that matches the problem you have.

  • Fit

    Ask what you will do differently the week after you finish. If you cannot answer, the book is for a different moment. Come back to it when the situation arrives.

Getting started

Robot motion and the software stack: the mathematics of rigid bodies and the middleware that ties a system together.

  • Start here

    Modern Robotics

    by Kevin M. Lynch, Frank C. Park · 2017

    ~540 pages~14 hrs to read

    The mathematics of robot motion: configuration space, rigid-body transforms, kinematics and dynamics, with a clear path from the basics to control. It is the reference most robotics software depends on.

    View book →
  • Programming Robots with ROS

    by Morgan Quigley, Brian Gerkey, William D. Smart · 2015

    ~430 pages~11 hrs to read

    A practical introduction to building a robot software system with the Robot Operating System, from nodes and messages to simulation. It shows how the pieces of a robot connect.

    View book →

Doing the job

Perception, estimation, planning and control: the books that turn sensor data into a decision and a trajectory.

  • Probabilistic Robotics

    by Sebastian Thrun, Wolfram Burgard, Dieter Fox · 2005

    ~670 pages~17 hrs to read

    How robots estimate their state from noisy sensors: Bayes filters, Kalman filters, localization and mapping. It is the standard treatment of state estimation for mobile robots.

    View book →
  • Introduction to Autonomous Robots

    by Roland Siegwart, Illah Nourbakhsh, Davide Scaramuzza · 2011

    ~470 pages~12 hrs to read

    A survey of mobile robot locomotion, sensing, localization and navigation. It connects the perception and planning topics into one picture of an autonomous system.

    View book →
  • Planning Algorithms

    by Steven M. LaValle · 2006

    ~840 pages~21 hrs to read

    Motion planning from first principles: configuration spaces, sampling-based planners and planning under uncertainty. Its algorithms underlie most path planning code in robotics.

    View book →
  • A Mathematical Introduction to Robotic Manipulation

    by Richard M. Murray, Zexiang Li, S. Shankar Sastry · 1994

    ~460 pages~12 hrs to read

    Kinematics, dynamics and control of robot arms with the mathematics made explicit. It is the book to read when a manipulator controller has to be derived, not only tuned.

    View book →
  • Robotics, Vision and Control

    by Peter Corke · 2017

    ~720 pages~18 hrs to read

    Robot vision and control in MATLAB and Python examples. It joins the perception and control steps in one book and is useful when a camera has to drive a robot.

    View book →

Senior and leading

Planning theory and the trade-offs between approaches, for the engineers who choose a planner for a whole platform.

  • Principles of Robot Motion

    by Howie Choset, Kevin M. Lynch, Seth Hutchinson, George Kantor, Wolfram Burgard, Lydia E. Kavraki, Sebastian Thrun · 2005

    ~640 pages~16 hrs to read

    Theory and algorithms for planning and controlling robots across many configurations. It helps a lead judge which planning approach fits a platform and what its guarantees are.

    View book →

Book links go to Amazon and are affiliate links. As an Amazon Associate I earn from qualifying purchases.

Frequently asked questions

Which book should a Robotics Software Engineer read first?

Modern Robotics by Kevin M. Lynch, Frank C. Park. It covers the configuration space and rigid-body mathematics that every robot depends on. Read it first, because the rest of the list assumes it.

Do I need to read all 8 books?

No. The list is a menu, not a syllabus. Find your stage (getting started: 2, doing the job: 5, senior and leading: 1), begin with one book (we suggest Modern Robotics), then pick the next book by the problem you are facing at work. Come back to the others when the situation they cover arrives.

How long does it take to read these books?

All 8 books add up to about 4,770 pages, roughly 119 hours at 1.5 minutes a page. At three hours a week that is about 40 weeks; at six hours a week, about 20. The list is meant to be read over time, one book at a time, not in one run.

Are these books up to date?

They range from 1994 (A Mathematical Introduction to Robotic Manipulation) to 2017 (Modern Robotics). Older titles are included because they teach principles that have not changed; for tools and platforms, we favor recent editions. Check the edition before you buy.

Some links are affiliate links: we earn a small commission if you buy, at no cost to you. It does not change what we list.